LP ACCESSORIES
Liquid Tote Accessories
Lapoint Packaging provides an assortment of fitments and accessories to complete your filling and decanting needs. Inventory, special orders, MOQs, lead times and pricing vary – please contact your Lapoint Packaging rep or contact Customer Service for assistance.
See below for our full assortment under tabs: Decant Fitments, Filling Accessories, and Heat Pads / Other.
We are always adding new items to this section to support our customers’ operations. Please check back, or feel free to make requests for anything you don’t see here.
2″ NPT X BSP Nipple
Part # 102242
Precision molded in glass reinforced polypropylene, for strength and chemical resistance. PTFE seats for smooth operation and proper sealing characteristics.
- Double EPDM O-rings in stem area for extra sealing protection
- Interlocking body and end plate to allow easy thread connection when installing valve
- Maximum operating pressure 100 PSI at 70°Friptive text
2″ Buttress x NPT
Part # 102301
Precision molded in glass reinforced polypropylene, for strength and chemical resistance. PTFE seats for smooth operation and proper sealing characteristics
- Double EPDM O-rings in stem area for extra sealing protection
- Interlocking body and end plate to allow easy thread connection when installing valve
- Maximum operating pressure 100 PSI at 70°F
2″ BSP Extended Pusher Cutter
Part # 102259
A Pusher / Cutter Adapter is used when you need extra length to reach the liner’s crown cutter.
Some tote walls are too thick to puncture the liner with a standard fitment. This adapter, if needed, gives you the extra length to reach the blue crown cutter to puncture the liner and start product flow.
2″ Buttress Extended Pusher Cutter
Part # 102394
A Pusher / Cutter Adapter is used when you need extra length to reach the liner’s crown cutter.
This adapter, if needed, reaches the blue crown cutter to puncture the liner and start product flow.
Banjo Ball Valve
Part # 102243
Precision molded in glass reinforced polypropylene, for strength and chemical resistance. PTFE seats for smooth operation and proper sealing characteristics.
- Double EPDM O-rings in stem area for extra sealing protection
- Interlocking body and end plate to allow easy thread connection when installing valve
- Maximum operating pressure 100 PSI at 70°F
2″ Camlock Adapter
Part # 102302
Descriptive text
V50 Butterfly Valve
Part # 102237
Descriptive text
2″ Male BSP Tri Clamp Adapter
Part # 102236
Descriptive text
2″ Male BSP/CAM Adapter
Part # 102235
Descriptive text
2″ Plunge Cutter
Part # 102303
Descriptive text
Liquid Tote Accessory Parts/Price List
Part # 102247
Aluminum Fill Bridge for LP Liquid Totes
- Straddles short dimension of LP Liquid Totes.
- Swinging arm holds liner’s inlet valve in position.
- Easy access to and visibility of liner during fill process.
- Lightweight sturdy aluminum construction.
Heater Pad – UL
Part # 102392
Single-trip foil heaters are a cost-effective solution to rewarming foodstuffs, oils, and chemicals which can thicken or solidify as they cool during storage or transportation, making them difficult to dispense from an IBC.
Features and benefits
- Highly efficient source of heat due to direct contact with the liner bag.
- Cost effective and can reduce labor and unnecessary handling.
- Can reduce capital costs by eliminating the need for specialised hot rooms or water baths.
- Even distribution of heat across the surface of the heater.
Construction
- Universal IEC plug supplied as standard (other plug options available on request).
- Silicone insulated heating cable laminated between layers of Kraft paper and aluminium foil.
Related Products
LP Orcas are stackable, pop-up style bulk liquid packaging offering a greener alternative to corrugated liquid totes, 275 gallon bottle-in-cage, and pooled containers.
The MOBI 275 gallon is a great alternative to Bottle-in-Cage and Pooled IBCs. The Heavy Duty MOBI can stack 4-High and is suitable for warm fills and heat blanket use.
The 110 gallon is a great alternative to 55 gallon drums. Low profile for easy loading and stacking up to 5 high. Available for liquid or solids applications.
The 220 gallon ORCA is ideal for low profile/max capacity requirements and combines the best features of rigid IBCs with all the advantages of collapsible pop-up liquid totes
Our lightest offering, these well-positioned containers are the perfect solution for lighter, ambient temperature liquids, stackable up to 3-high.
Our PreSet containers arrive erected, banded, and ready to fill. The PreSet option is available on any of our container styles and sizes. Contact your Lapoint Packaging rep for a quote.
Related Industries
